MitchElectronics
Electronic Dice
£6.99
20 items in stock
Electronic dice that allows you to build your own fully functional electronic dice with a single roll button and 7 LED output in the shape of standard dice. RoHS compliant, REACH compliant, and perfect for beginners!
- Product Code
- EDICE
- Manufacturer
- MitchElectronics
- Manufacturer Part Number
- EDICE
- Category
- Blue Kits
- Country of Origin
- United Kingdom
RoHS: YesREACH: YesCE: YesUKCA: Yes
Overview
Product Description
If you find yourself inside on a rainy day and without dice to play your favourite board games then look no further as the MitchElectronics Electronic Dice kit is just for you! Built using three main sub-circuits this kit will simulate a dice with a simple cool-down system so you can watch the numbers roll. Press and hold the switch to start the dice rolling and then let go when your feeling lucking for that number which gets you past those expensive hotels or away from that ladder!
Resources
Instructions & Documentation
Technical
Product Specifications
- Assembly
- Kit form
- Prebuilt
No
- Battery Type
- 9V PP3
- PCB Dimensions
- 82mm x 33mm
- Mounting Holes
No
- Output Current
- N/A
- Output Voltage
- N/A
- Battery Powered
Yes
- Component Count
- 40
- Battery Included
No
- Operating Voltage
- 7V to 16V
- Operating Frequency
- N/A
In the box
Included With This Product
| Name | Quantity | Reference |
|---|---|---|
| 16 DIP Socket | 1 | U3 |
| 8 DIP Socket | 2 | U1, U2 |
| 4017 | 1 | U3 |
| 555 | 2 | U1, U2 |
| 2N3904 | 2 | Q1, Q2 |
| 330R Resistors | 3 | R6, R7, R8 |
| 470R Resistor | 1 | R5 |
| 1K Resistor | 1 | R3 |
| 10K Resistor | 4 | R1, R2, R9, R10 |
| 680K Resistor | 1 | R4 |
| 100nF Capacitors | 6 | C2, C3, C4, C5, C6, C7 |
| 100uF Capacitor | 1 | C1 |
| Tactile Switch | 1 | SW1 |
| Red LED | 7 | D7 to D13 |
| 1N4148 | 6 | D1 to D6 |
| PP3 Connector | 1 | BT1 |
| Electronic Dice PCB | 1 | — |
More information
Applications
- The electronic dice is an ideal project for those who are new to electronics and want a project that has a practical purpose. An electronic dice is a good alternative to standard dice which are easy to lose and easy to cheat. The electronic dice kit is a perfect project for electronic hobbyists, clubs, and schools that have a limited amount of time for construction. This kit can be built in under an hour, and only requires a PP3 battery to operate.
- This kit is only suitable for games that require 6-sided dice, and cannot be used with advanced games such as War Hammer, Dungeons and Dragons, and WW2 – Who Dares Wins.
- Education and training – Useful for teaching pseudo-random sequencing, 555 timing and counter logic, while providing practical experience with through-hole soldering, component identification and PCB assembly.
More information
Notes
- Electrical specifications are nominal and may vary with component tolerances, supply voltage, load and operating conditions.
- The product is supplied in kit form and requires soldering and assembly before use.
- Check component values and observe the polarity or orientation of ICs, diodes, LEDs, transistors and electrolytic capacitors before applying power.
- A 9V PP3 battery is not included.