MitchElectronics
555 Monostable SMD Trainer
£3.99
20 items in stock
The 555 Monostable SMD Trainer is a 555 monostable circuit made entirely with SMD components, and the goal of this kit is to help teach SMD soldering. RoHS and REACH compliant, ideal for classrooms and workshops, and superb for beginners looking to improve their soldering skills!
- Product Code
- 555MONO-SMD
- Manufacturer
- MitchElectronics
- Manufacturer Part Number
- 555MONO-SMD
- Category
- SMD Trainers
- Country of Origin
- United Kingdom
RoHS: YesREACH: YesCE: YesUKCA: Yes
Overview
Product Description
This kit is part of the SMD Trainer range that only uses SMD parts to test out your soldering skills. This kit provides all the parts needed to create the famous 555 Monostable circuit that blinks an LED, and the on-time of the LED is controlled via the SMD potentiometer. Before making this kit, be sure to read our SMD soldering guide found in our resources page, and pay extra attention when positioning components because de-soldering SMD parts can be extremely challenging.
Resources
Instructions & Documentation
Technical
Product Specifications
- Assembly
- Kit form
- Prebuilt
No
- PCB Dimensions
- 23mm x 22mm
- Mounting Holes
Yes
- Battery Powered
Yes
- Component Count
- 9
- Battery Included
No
- Operating Voltage
- 3V to 9V
- Operating Frequency
- N/A
- Mounting Hole Details
- 4 x M2 (19mm x 18mm)
In the box
Included With This Product
| Name | Quantity | Reference |
|---|---|---|
| NE555 | 1 | IC1 |
| 100Ω Resistor | 1 | R2 |
| 1KΩ Resistor | 2 | R1, R3 |
| 100KΩ Potentiometer | 1 | RV1 |
| 100nF Capacitor | 1 | C2 |
| 100uF Capacitor | 1 | C1 |
| Tactile Switch | 1 | SW1 |
| Red LED | 1 | D1 |
| PP3 Connector | 1 | +, - |
| 555 Monostable SMD PCB | 1 | — |
More information
Applications
- The 555 Monostable SMD Trainer is ideal for SMD solder practice, and works well with the SMD Soldering Guide found in our resources page. This kit is also ideal for those who want to get into electronics, and the small size of this kit also makes it ideal for applications that need a small, modularised board. For example, this kit can be used to control a fluid pump to deliver specific amounts of a liquid after pressing the button.
- Education and training – Useful for teaching 555 timer operation, monostable timing and one-shot pulses, while providing practical experience with surface-mount soldering, component identification and post-assembly testing.
- Project integration – Suitable for projects such as SMD One-Shot Trainer, Push-Button Pulse Generator, Delay and Timing Experiment, and other designs where the following function is useful: Surface-mount 555 monostable trainer for learning one-shot timing circuits and SMD soldering
More information
Notes
- Electrical specifications are nominal and may vary with component tolerances, supply voltage, load and operating conditions.
- The product is supplied in kit form and requires soldering and assembly before use.
- Check component values and observe the polarity or orientation of ICs, diodes, LEDs, transistors and electrolytic capacitors before applying power.
- Battery or external power source is not included.
- This trainer uses surface-mount components and is intended to develop SMD placement and soldering skills.