MitchElectronics
4013 D-Type Flip-Flop Board
£5.99
20 items in stock
The 4013 D-Type Flip Flop Board lets you experiment with the 4013 dual flip flop IC, how to convert them into a toggle, and much more! Ideal for education and soldering practice.
- Product Code
- 4013-FLIPFLOP
- Manufacturer
- MitchElectronics
- Manufacturer Part Number
- 4013-FLIPFLOP
- Category
- Blue Kits
- Country of Origin
- United Kingdom
RoHS: YesREACH: YesCE: YesUKCA: Yes
Overview
Product Description
The 4013 D-Type Flip Flop kit is designed to let you experiment with the famous 4013 IC, which incorporates two independent flip flops. Each of these flip-flops not only has two complementary outputs, a clock input, and data input, but also a set and reset input that can be used to force the state of the flip-flop to a particular value.
Even though the 4013 IC (which is a part of the 4000 series of logic devices), has two independent flip-flops, the kit only uses one of these flip-flops, with the other being entirely unused. This is to keep the circuit simple and reduce the number of components on the PCB.
The board integrates a special switch, SW3, which allows for connecting the D input to the complementary output /Q, which will turn the flip-flop into a toggle latch. When in toggle mode, pushing the clock input, the internal state of the flip-flop will switch to the opposite value.
Even though the 4013 IC (which is a part of the 4000 series of logic devices), has two independent flip-flops, the kit only uses one of these flip-flops, with the other being entirely unused. This is to keep the circuit simple and reduce the number of components on the PCB.
The board integrates a special switch, SW3, which allows for connecting the D input to the complementary output /Q, which will turn the flip-flop into a toggle latch. When in toggle mode, pushing the clock input, the internal state of the flip-flop will switch to the opposite value.
Resources
Instructions & Documentation
Technical
Product Specifications
- Assembly
- Kit form
- Prebuilt
No
- PCB Dimensions
- 54mm x 43mm
- Mounting Holes
Yes
- Battery Powered
Yes
- Component Count
- 25
- Battery Included
No
- Operating Voltage
- 3V – 9V
- Operating Frequency
- N/A
- Mounting Hole Details
- 4 x M4 (46mm x 35mm)
In the box
Included With This Product
| Name | Quantity | Reference |
|---|---|---|
| 14-DIP Socket | 1 | U1 |
| 4013 IC | 1 | U1 |
| 100nF Capacitor | 1 | C1 |
| 1K Resistor | 10 | R1 to R10 |
| 3mm Red LEDs | 6 | D1 to D6 |
| Tactile Switches | 4 | SW1, SW2, SW4, SW5 |
| SPST Switch | 1 | SW3 |
| PP3 Connector | 1 | BT1 |
| 4013 D-Type PCB | 1 | — |
More information
Applications
- The 4013 D-Type Flip Flop kit is an ideal teaching tool for learning how latches work, connecting them together, and toggle functions. As the kit requires assembly, the 4013 D-Type Flip Flop kit is also suitable for solder practice, giving students two opportunities for education in a single kit. Pin contacts on the side of the board allow for further expansion with other circuits, thus enabling for more complex projects.
- Education and training – Useful for teaching D-type flip-flops, set and reset inputs and toggle operation, while providing practical experience with through-hole soldering, component identification and PCB assembly.
- Project integration – Suitable for projects such as Toggle Switch Demonstrator, Divide-by-Two Clock, One-Bit Memory Experiment, and other designs where the following function is useful: Hands-on 4013 D-type flip-flop board with visible state indication and toggle-mode experimentation
More information
Notes
- Electrical specifications are nominal and may vary with component tolerances, supply voltage, load and operating conditions.
- The product is supplied in kit form and requires soldering and assembly before use.
- Check component values and observe the polarity or orientation of ICs, diodes, LEDs, transistors and electrolytic capacitors before applying power.
- Battery or external power source is not included.