The HSEG1000 IC is a display controller which converts an 8-bit bus (two 4-bit hexadecimal numbers) into a dual hexadecimal display. Most 7 segment IC drivers on the market only output BCD where numbers greater than 9 are left blank. The HSEG1000 however displays the full 16 number range from 0 to F on 7 segment displays. The HSEG1000 can be configured to either display latched data (which is latched on the falling edge of WRT) or display the data that is current on the input.
- Full range hex digits 0 to F
- Latching or transparent mode
- Drives two displays for 8-bit numbers